L120-10 Declutch Assembly Parts Breakdown
1. Install Declutch Cap (piece #11) on the Declutch Shaft (piece 7A). Ensure that the return spring is located correctly in the endcap.
2. Replace Declutch Lever (piece #11) on the shaft with the lever against the stop.
3. While holding the cap steady, rotate the declutch shaft against the spring tension until the holes in the shaft and lever align.
4. Replace complete assembly in main housing. Ensure that the lug on the Declutch Actuator (piece #7-1) fits into the groove on the Handwheel Clutch Sleeve.
5. Secure the declutch cap.
NOTE: When the declutch lever is disengaged against the declutch stop (motor operation position), the Declutch Actuator (piece #7-1) should not be in contact with the groove on the handwheel Clutch Sleeve.